Autotronics
Specializing in Ambulance and Rescue Vehicles, Bus, Shuttle and Wheelchair Accessible Vehicles and Adaptive Equipment Sales and Services

Ferno Stretchers and Stair Chairs

POWERFlexx+® Powered Cot

The POWERFlexx™+ System delivers advanced power management features and in-the-fastener charging to keep you powered on every call without having to lug around extra batteries or take them out to charge.

The POWERFlexx+™ Powered Ambulance Cot also features 700lb unassisted lift capacity. The cot lifts the 700 lb. weight, not the operators, reducing situations where operators may injure their back.

POWERFlexx+® Powered Cot

X-Frame Cot - 35X PROFlexX®

Ferno’s PROflexX, X-Frame cot, has been carefully engineered to provide the stability you need when transferring and transporting patients.

A longer, solid front leg in the X frame provides minimal flex and a low center of gravity at all heights. This means you may be less likely to flip or tip a cot during transfers and transport, reducing situations that may cause injury to you or your patient.

The PROflexX can carry 700 lbs. in the transport position and up to 1100 lbs in the lowest position.

X-Frame Cot - 35X PROFlexX®

28Z PROFlexx® Chair-Cot

The New 28Z PROFlexx® Chair-Cot provides maximum versatility in confining  environments.

The maneuverability and flexibility of transforming from chair to cot allows you to respond in confining  environments, such as tight hallways, narrow staircases, and small elevators, without transferring the patient. The 28Z’s light weight, superior stability, load capacity, and flexible handling features reduce situations that may cause injury to you or your patient.

The 28Z is available with or without a lower hard tray. The picture above shows the 28Z with optional accessories.

28Z PROFlexx® Chair-Cot

H-Frame Cot - 93-H PROFlexx® Series

Ferno’s 93H PROFlexx H-frame Ambulance Cot provides operators with easier lifting and loading thanks to the exclusive, multi-position foot-end load frame. The 93H PROFlexx also features an exclusive transport position that provides maximum stability when rolling the raised cot with a patient on it.

H-Frame Cot - 93-H PROFlexx® Series

X-Frame Cot - 35-A Mobile Transporter™ Series

The 35-A Mobile Transporter X-Frame Cot Series provides time-tested performance and reliability in the lightest cot available. Just 74 lbs, with a 500 lb. load capacity!

X-Frame Cot - 35-A Mobile Transporter™ Series
For more choices contact your closest Autotronics today.  

Madawaska, Maine

(Corporate Headquarters/Service Center)

Telephone:  (207) 543-6262
FAX:  (207) 543-7412

Postal Address:
Autotronics/FND Inc.
PO Box 535
Madawaska, ME  04756

Shipping/Physical Address:
Autotronics/FND Inc.
129 US Route 1
Frenchville, ME  04745


Bangor, Maine

(ADA Sales/Service Center)

Telephone:  (207) 947-9897
FAX:  (207) 947-6166

Postal/Shipping/Physical Address:

Autotronics
69 Perry Road
Bangor, ME 04401

Whitman, Massachusetts

(Sales/Service Center)

Telephone:  (781) 447-0707
FAX:  (781) 447-0119

Postal/Shipping/Physical Address:

Autotronics
215 Bedford Street
Whitman, MA  02382